#!/bin/sh

USERID=""
IFACE=""
KISMET=/etc/kismet/kismet.conf
CH=$3; [ x$3 = "x" ] && CH=10
IFACE_FOUND="false"
MADWIFI=0
MAC80211=0

PROCESSES="wpa_action\|wpa_supplicant\|wpa_cli\|dhclient\|ifplugd\|dhcdbd\|NetworkManager\|knetworkmanager\|avahi-autoipd\|avahi-daemon"

usage() {
	printf "usage: `basename $0` <start|stop|check> <interface> [channel]\n"
	echo
	exit
}

startStdIface() {
	iwconfig $1 mode monitor 2> /dev/null >/dev/null
	iwconfig $1 channel $2 2> /dev/null >/dev/null
	iwconfig $1 key off 2> /dev/null >/dev/null
	ifconfig $1 up
	printf " (monitor mode enabled)"
}


stopStdIface() {
	ifconfig $1 down 2> /dev/null >/dev/null
	iwconfig $1 mode Managed 2> /dev/null >/dev/null
	ifconfig $1 down 2> /dev/null >/dev/null
	printf " (monitor mode disabled)"
}

getModule() {
    if [ -f "/sys/class/net/$1/device/driver/module/srcversion" ]
    then
        srcver1=`cat "/sys/class/net/$1/device/driver/module/srcversion"`
        for j in `lsmod | awk '{print $1}' | grep -v "^Module$"`
        do
            srcver2="`modinfo $j | grep srcversion | awk '{print $2}'`"
            if [ $srcver1 = "$srcver2" ]
            then
                MODULE=$j
                break
            fi
        done
    else
        MODULE=""
    fi
#    return 0
}

getDriver() {
   if [ -e "/sys/class/net/$1/device/driver" ]
   then
       DRIVER="`ls -l "/sys/class/net/$1/device/driver" | sed 's/^.*\/\([a-zA-Z0-9_-]*\)$/\1/'`"
       BUS="`ls -l /sys/class/net/$1/device/driver | sed 's/^.*\/\([a-zA-Z0-9_-]*\)\/.*\/.*$/\1/'`"
   else
       DRIVER=""
       BUS=""
   fi
}

scanProcesses() {
    match=`ps -A -o comm= | grep $PROCESSES | grep -v grep | wc -l`
    if [ $match -gt 0 ]
    then
        echo && echo
        echo "Found $match processes that could cause trouble."
        echo "If airodump-ng, aireplay-ng or airtun-ng stops working after"
        echo "a short period of time, you may want to kill (some of) them!"
        echo
        echo "PID\tName"
    else
        return
    fi

    i=1
    while [ $i -le $match ]
    do
        pid=`ps -A -o pid= -o comm= | grep $PROCESSES | grep -v grep | head -n $i | tail -n 1 | awk '{print $1}'`
        pname=`ps -A -o pid= -o comm= | grep $PROCESSES | grep -v grep | head -n $i | tail -n 1 | awk '{print $2}'`
        printf "$pid\t$pname\n"
        i=$(($i+1))
    done
}

checkProcessesIface() {
    if [ x"$1" = x ]
    then
        return
    fi

    for i in `ps auxw | grep $1 | grep -v "grep" | grep -v "airmon-ng" | awk '{print $2}'`
    do
        pname=`ps -o comm= -p $i`
        echo "Process with PID $i ($pname) is running on interface $1"
    done
}

getStack() {
    if [ x"$1" = x ]
    then
        return
    fi

    if [ -d /sys/class/net/$1/phy80211/ ]
    then
        MAC80211=1
    else
        MAC80211=0
    fi
}

#you need to run getDriver $iface prior to getChipset
getChipset() {
    if [ x"$1" = x ]
    then
        return
    fi

    CHIPSET=""

    if [ x$DRIVER = "xzd1211rw" -o x$DRIVER = "xzd1211rw_mac80211" ]
    then
        CHIPSET="Zydas 1211"
    fi

    if [ x$DRIVER = "xhostap" ]
    then
        CHIPSET="Prism 2/2.5/3"
    fi

    if [ x$DRIVER = "xr8187" -o x$DRIVER = "xrtl8187" ]
    then
        CHIPSET="Realtek 8187L"
    fi

    if [ x$DRIVER = "xrt2570" -o x$DRIVER = "xrt2500usb" ]
    then
        CHIPSET="Ralink 2570 USB"
    fi

    if [ x$DRIVER = "xrt2500" -o x$DRIVER = "xrt2500pci" ]
    then
        CHIPSET="Ralink 2500 PCI"
    fi

    if [ x$DRIVER = "xrt61" -o x$DRIVER = "xrt61pci" ]
    then
        CHIPSET="Ralink 2561 PCI"
    fi

    if [ x$DRIVER = "xrt73" -o x$DRIVER = "xrt73usb" ]
    then
        CHIPSET="Ralink 2573 USB"
    fi

    if [ x$DRIVER = "xipw2100" ]
    then
        CHIPSET="Intel 2100 b"
    fi

    if [ x$DRIVER = "xipw2200" ]
    then
        CHIPSET="Intel 2200 b/g"
    fi

    if [ x$DRIVER = "xipw3945" ]
    then
        CHIPSET="Intel 3945 a/b/g"
    fi

    if [ x$DRIVER = "xipw4965" ]
    then
        CHIPSET="Intel 4945 a/b/g/n"
    fi

    if [ x$DRIVER = "xath_pci" ]
    then
        CHIPSET="Atheros"
    fi

    if [ x$DRIVER = "xorinoco" ]
    then
        CHIPSET="Hermes/Prism"
    fi
}

getPhy() {
    PHYDEV=""
    if [ x"$1" = x ]
    then
        return
    fi

    if [ x$MAC80211 = "x" ]
    then
        return
    fi

    PHYDEV="`ls -l "/sys/class/net/$1/phy80211" | sed 's/^.*\/\([a-zA-Z0-9_-]*\)$/\1/'`"
}

getNewMon() {
    i=0

    while [ -d /sys/class/net/mon$i/ ]
    do
        i=$(($i+1))
    done

    MONDEV="mon$i"
}

if [ x"`which id 2> /dev/null`" != "x" ]
then
	USERID="`id -u 2> /dev/null`"
fi

if [ x$USERID = "x" -a x$UID != "x" ]
then
	USERID=$UID
fi

if [ x$USERID != "x" -a x$USERID != "x0" ]
then
	echo Run it as root ; exit ;
fi

iwpriv > /dev/null 2> /dev/null ||
  { echo Wireless tools not found ; exit ; }

if [ x"$1" = xcheck ]
then
    scanProcesses
    for iface in `iwconfig 2>/dev/null | egrep '(IEEE|ESSID|802\.11|WLAN)' | sed 's/^\([a-zA-Z0-9_]*\) .*/\1/' | grep -v wifi`
    do
#         getModule $iface
#         getDriver $iface
        checkProcessesIface $iface
    done
    exit
fi

echo && echo

if [ $# -ne "0" ]
then
    if [ x$1 != "xstart" ] && [ x$1 != "xstop" ]
    then
        usage
    fi

    if [ x$2 = "x" ]
    then
        usage
    fi
fi

SYSFS=0
if [ -d /sys/ ]
then
    SYSFS=1
fi

printf "Interface\tChipset\t\tDriver\n" && echo


for iface in `ifconfig -a 2>/dev/null | egrep UNSPEC | sed 's/^\([a-zA-Z0-9_]*\) .*/\1/'`
do

 if [ x"`iwpriv $iface 2>/dev/null | grep ipwraw-ng`" != "x" ]
 then
        printf "$iface\t\tCentrino a/b/g\tipwraw-ng"
        if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
        then
                cp $KISMET~ $KISMET 2>/dev/null &&
                echo "source=ipw3945,$iface,Centrino_abg" >>$KISMET
                startStdIface $iface $CH
                iwconfig $iface rate 1M 2> /dev/null >/dev/null
                iwconfig $iface txpower 16 2> /dev/null >/dev/null
        fi
        if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
        then
                stopStdIface $iface
                iwconfig $iface txpower 15 2> /dev/null >/dev/null
                iwconfig $iface rate 54M 2> /dev/null >/dev/null
        fi
        echo
        continue
 fi

 if [ -e "/proc/sys/dev/$iface/fftxqmin" ]
 then
    MADWIFI=1
    ifconfig $iface up
    printf "$iface\t\tAtheros\t\tmadwifi-ng"
    if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
    then
        IFACE=`wlanconfig ath create wlandev $iface wlanmode monitor -bssid`
        cp $KISMET~ $KISMET 2>/dev/null &&
        echo "source=madwifi_g,$iface,Atheros" >>$KISMET
        ifconfig $iface up
        iwconfig $IFACE channel $CH
        ifconfig $IFACE up
    fi
    if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
    then
            echo "$iface does not support 'stop', do it on ath interface"
    fi
    echo
    continue
 fi
done

if [ $MADWIFI -eq 1 ]
then
	sleep 1s
fi

for iface in `iwconfig 2>/dev/null | egrep '(IEEE|ESSID|802\.11|WLAN)' | sed 's/^\([a-zA-Z0-9_]*\) .*/\1/' | grep -v wifi`
do
 getModule  $iface
 getDriver  $iface
 getStack   $iface
 getChipset $DRIVER


 if [ x$MAC80211 = "x1" ]
 then
    getPhy $iface
    getNewMon
    printf "$iface\t\t$CHIPSET\t$DRIVER - [$PHYDEV]"
    if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
    then
        echo -n "$MONDEV" > /sys/class/ieee80211/"$PHYDEV"/add_iface
        sleep 0.1
        iwconfig $MONDEV mode Monitor &>/dev/null
        ifconfig $MONDEV up
        printf "\n\t\t\t\t(monitor mode enabled on $MONDEV)"
    fi
    if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
    then
        z="`echo $iface | cut -b -3`"
        if [ x$z = "xmon" ]
        then
            echo -n "$iface" > /sys/class/ieee80211/"$PHYDEV"/remove_iface
            printf " (removed)"
        else
            ifconfig $iface down
            iwconfig $iface mode managed
            printf "\n\t\t\t\t(monitor mode disabled)"
        fi
    fi
    echo
    continue
 fi


 if [ x$DRIVER = "xorinoco" ] || [ x"`iwpriv $iface 2>/dev/null | grep get_rid`" != "x" ] || [ x"`iwpriv $iface 2>/dev/null | grep dump_recs`" != "x" ]
 then
    printf "$iface\t\tHermesI\t\torinoco"
    if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
    then
        cp $KISMET~ $KISMET 2>/dev/null &&
        echo "source=orinoco,$iface,HermesI" >>$KISMET
        iwconfig $iface mode Monitor channel $CH &>/dev/null
        iwpriv $iface monitor 1 $CH &>/dev/null
        ifconfig $iface up
        printf " (monitor mode enabled)"
    fi
    if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
    then
        ifconfig $iface down
        iwpriv $iface monitor 0 &>/dev/null
        iwconfig $iface mode Managed &>/dev/null
        printf " (monitor mode disabled)"
    fi
    echo
    continue
 fi


 if [ x$DRIVER = "xipw2100" ] || [ x"`iwpriv $iface 2>/dev/null | grep set_crc_check`" != "x" ]
 then
    printf "$iface\t\tCentrino b\tipw2100"
    if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
    then
        cp $KISMET~ $KISMET 2>/dev/null &&
        echo "source=ipw2100,$iface,Centrino_b" >>$KISMET
        startStdIface $iface $CH
    fi
    if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
    then
        stopStdIface $iface
    fi
    echo
    continue
 fi


 if [ x$DRIVER = "xipw2200" ] || [ x"`iwpriv $iface 2>/dev/null | grep sw_reset`" != "x" ]
 then
    MODINFO=`modinfo ipw2200 2>/dev/null | awk '/^version/ {print $2}'`
    if { echo "$MODINFO" | grep -E '^1\.0\.(0|1|2|3)$' ; }
    then
    	echo "Monitor mode not supported, please upgrade"
    else
	printf "$iface\t\tCentrino b/g\tipw2200"
	if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
	then
	    cp $KISMET~ $KISMET 2>/dev/null &&
	    echo "source=ipw2200,$iface,Centrino_g" >>$KISMET
	    startStdIface $iface $CH
	fi
	if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
	then
	    stopStdIface $iface
	fi

    	if { echo "$MODINFO" | grep -E '^1\.0\.(5|7|8|11)$' ; }
	then
		printf " (Warning: bad module version, you should upgrade)"
	fi
     fi
     echo
     continue
 fi


 if [ x$DRIVER = "xcx3110x" ] || [ x"`iwpriv $iface 2>/dev/null | grep set_backscan`" != "x" ]
 then
     printf "$iface\t\tNokia 770\t\tcx3110x"
     if [ x$1 = "xstart" ] || [ x$1 = "xstop" ]
     then
     	printf " (Enable/disable monitor mode not yet supported)"
     fi
     echo
     continue
 fi


 if [ x$DRIVER = "xipw3945" ] || [ x"`iwpriv $iface 2>/dev/null | grep set_preamble | grep -v set_crc_check`" != "x" ]
  then
        printf "$iface\t\tCentrino b/g\tipw3945"
        if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
         then
                cp $KISMET~ $KISMET 2>/dev/null &&
                echo "source=ipw3945,$iface,Centrino_g" >>$KISMET
                startStdIface $iface $CH
        fi
        if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
         then
                stopStdIface $iface
        fi
        echo
        continue
 fi


 if [ x"`iwpriv $iface 2>/dev/null | grep inact_auth`" != "x" ]
 then
     if [ -e "/proc/sys/net/$iface/%parent" ]
     then
        printf "$iface\t\tAtheros\t\tmadwifi-ng VAP (parent: `cat /proc/sys/net/$iface/%parent`)"
	if [ x$2 = x$iface ] && [ x$1 = "xstop" ]
	then
		wlanconfig $iface destroy
		printf " (VAP destroyed)"
	fi
	if [ x$1 = "xstart" ]
	then
		if [ $iface = "$IFACE" ]
		then
			printf " (monitor mode enabled)"
		fi
		if [ x$2 = x$iface ]
		then
			printf " (VAP cannot be put in monitor mode)"
		fi
	fi

	echo ""
        continue

     fi
     printf "$iface\t\tAtheros\t\tmadwifi"
     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
     then
         cp $KISMET~ $KISMET 2>/dev/null &&
         echo "source=madwifi_g,$iface,Atheros" >>$KISMET
         startStdIface $iface $CH
     fi
     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
         stopStdIface $iface
     fi
     echo
     continue
 fi


 if [ x$DRIVER = "xprism54" ] || [ x"`iwpriv $iface 2>/dev/null | grep getPolicy`" != "x" ]
 then
     printf "$iface\t\tPrismGT\t\tprism54"
     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
     then
         cp $KISMET~ $KISMET 2>/dev/null &&
         echo "source=prism54g,$iface,Prism54" >>$KISMET
         ifconfig $iface up
         iwconfig $iface mode Monitor channel $CH
         iwpriv $iface set_prismhdr 1 &>/dev/null
         printf " (monitor mode enabled)"
     fi
     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
         stopStdIface $iface
     fi
     echo
     continue
 fi


 if [ x$DRIVER = "xhostap" ] || [ x"`iwpriv $iface 2>/dev/null | grep antsel_rx`" != "x" ]
 then
     printf "$iface\t\tPrism2\t\tHostAP"
     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
     then
         cp $KISMET~ $KISMET 2>/dev/null &&
         echo "source=hostap,$iface,Prism2" >>$KISMET
         iwconfig $iface mode Monitor channel $CH
         iwpriv $iface monitor_type 1 &>/dev/null
         ifconfig $iface up
         printf " (monitor mode enabled)"
     fi
     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
         stopStdIface $iface
     fi
     echo
     continue
 fi


 if [ x$DRIVER = "xwlan-ng" ] || [ x"`wlancfg show $iface 2>/dev/null | grep p2CnfWEPFlags`" != "x" ]
 then
     printf "$iface\t\tPrism2\t\twlan-ng"
     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
     then
         cp $KISMET~ $KISMET 2>/dev/null &&
         echo "source=wlanng,$iface,Prism2" >>$KISMET
         wlanctl-ng $iface lnxreq_ifstate ifstate=enable >/dev/null
         wlanctl-ng $iface lnxreq_wlansniff enable=true channel=$CH \
                           prismheader=true wlanheader=false \
                           stripfcs=true keepwepflags=true >/dev/null
         echo p2CnfWEPFlags=0,4,7 | wlancfg set $iface
         ifconfig $iface up
         printf " (monitor mode enabled)"
     fi
     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
         ifconfig $iface down
         wlanctl-ng $iface lnxreq_wlansniff enable=false  >/dev/null
         wlanctl-ng $iface lnxreq_ifstate ifstate=disable >/dev/null
         printf " (monitor mode disabled)"
     fi
     echo
     continue
 fi


 if [ x$SYSFS = "x" ] && [ x"`iwpriv $iface 2>/dev/null | grep get_RaAP_Cfg`" != "x" ]
 then
    if [ x"`iwconfig $iface | grep ESSID | awk -F\  '{ print $2}' | grep -i rt61`" != "x" ]
    then
    	printf "$iface\t\tRalink b/g\trt61"
    fi

    if [ x"`iwconfig $iface | grep ESSID | awk -F\  '{ print $2}' | grep -i rt73`" != "x" ]
    then
        printf "$iface\t\tRalink USB\trt73"
    fi

    if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
    then
         startStdIface $iface $CH
         iwpriv $iface rfmontx 1
    fi
    echo
    continue

 fi


 if [ x$DRIVER = "xrt61" ]
 then
    printf "$iface\t\tRalink b/g\trt61"

    if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
    then
         startStdIface $iface $CH
         iwpriv $iface rfmontx 1
    fi
    echo
    continue

 fi


 if [ x$DRIVER = "xrt73" ]
 then
    printf "$iface\t\tRalink USB\trt73"

    if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
    then
         startStdIface $iface $CH
         iwpriv $iface rfmontx 1
    fi
    echo
    continue

 fi


 if [ x$DRIVER = "xrt2500" ] || [ x"`iwpriv $iface 2>/dev/null | grep bbp`" != "x" ]
 then
     printf "$iface\t\tRalink b/g\trt2500"
     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
     then
         cp $KISMET~ $KISMET 2>/dev/null &&
         echo "source=rt2500,$iface,Ralink_g" >>$KISMET
         iwconfig $iface mode ad-hoc 2> /dev/null >/dev/null
         startStdIface $iface $CH
     fi
     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
         stopStdIface $iface
     fi
     echo
     continue
 fi


 if [ x$DRIVER = "xrt2570" ] || [ x"`iwpriv $iface 2>/dev/null | grep wpapsk`" != "x" ] && [ x"`iwpriv $iface 2>/dev/null | grep get_RaAP_Cfg`" = "x" ]
 then
     printf "$iface\t\tRalink USB\trt2570"
     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
     then
         cp $KISMET~ $KISMET 2>/dev/null &&
         echo "source=rt2500,$iface,Ralink_g" >>$KISMET
         iwconfig $iface mode ad-hoc 2> /dev/null >/dev/null
         startStdIface $iface $CH
         if [ x"`iwpriv $iface 2>/dev/null | grep forceprismheader`" != "x" ]
         then
             iwpriv $iface forceprismheader 1
         fi
     fi
     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
         stopStdIface $iface
     fi
     echo
     continue
 fi


 if [ x$DRIVER = "xr8180" ] || [ x"`iwpriv $iface 2>/dev/null | grep debugtx`" != "x" ]
 then
     printf "$iface\t\tRTL8180\t\tr8180"
     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
     then
         cp $KISMET~ $KISMET 2>/dev/null &&
         echo "source=rt8180,$iface,Realtek" >>$KISMET
         iwconfig $iface mode Monitor channel $CH
         if [ x"`iwpriv $iface 2>/dev/null | grep prismhdr`" != "x" ]
         then
            iwpriv $iface prismhdr 1 &>/dev/null
         fi
         ifconfig $iface up
         printf " (monitor mode enabled)"
     fi
     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
         stopStdIface $iface
     fi
     echo
     continue
 fi


 if [ x$DRIVER = "xr8187" ] || [ x"`iwpriv $iface 2>/dev/null | grep badcrc`" != "x" ]
 then
     printf "$iface\t\tRTL8187\t\tr8187"
     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
     then
         cp $KISMET~ $KISMET 2>/dev/null &&
         echo "source=rt8180,$iface,Realtek" >>$KISMET
         iwconfig $iface mode Monitor channel $CH
         if [ x"`iwpriv $iface 2>/dev/null | grep rawtx`" != "x" ]
         then
             iwpriv $iface rawtx 1 &>/dev/null
         fi
         ifconfig $iface up
         printf " (monitor mode enabled)"
     fi
     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
         stopStdIface $iface
     fi
     echo
     continue
 fi


 if [ x$DRIVER = "xzd1211rw" ] || [ x"`iwpriv $iface 2>/dev/null | grep get_regdomain`" != "x" ]
 then
     printf "$iface\t\tZyDAS\t\tzd1211rw"
     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
     then
         cp $KISMET~ $KISMET 2>/dev/null &&
         echo "source=wlanng_legacy,$iface,ZyDAS" >>$KISMET
         startStdIface $iface $CH
     fi
     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
         stopStdIface $iface
     fi
     echo
     continue
 fi


 if [ x$DRIVER = "xzd1211" ] || [ x"`iwpriv $iface 2>/dev/null | grep dbg_flag`" != "x" ]
 then
     printf "$iface\t\tZyDAS\t\tzd1211"
     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
     then
         cp $KISMET~ $KISMET 2>/dev/null &&
         echo "source=wlanng_legacy,$iface,ZyDAS" >>$KISMET
         startStdIface $iface $CH
     fi
     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
         stopStdIface $iface
     fi
     echo
     continue
 fi


 if [ x$DRIVER = "xacx" ] || [ x"`iwpriv $iface 2>/dev/null | grep GetAcx1`" != "x" ]
 then
     printf "$iface\t\tTI\t\tacx111"
     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
     then
         cp $KISMET~ $KISMET 2>/dev/null &&
         echo "source=acx100,$iface,TI" >>$KISMET
         iwpriv $iface monitor 2 $CH 2> /dev/null >/dev/null
         startStdIface $iface $CH
     fi
     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
         stopStdIface $iface
     fi
     echo
     continue
 fi


 if [ x$DRIVER = "xbcm43xx" ] || [ x"`iwpriv $iface 2>/dev/null | grep write_sprom`" != "x" ]
 then
     printf "$iface\t\tBroadcom\tbcm43xx"
     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
     then
         cp $KISMET~ $KISMET 2>/dev/null &&
         echo "source=bcm43xx,$iface,broadcom" >>$KISMET
         startStdIface $iface $CH
     fi
     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
         stopStdIface $iface
         ifconfig $iface up
     fi
     echo
     continue
 fi


 if [ x$DRIVER = "xislsm" ] || [ x"`iwpriv $iface 2>/dev/null | grep set_announcedpkt`" != "x" ]
 then
    printf "$iface\t\tPrismGT\t\tislsm"
    if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
    then
         startStdIface $iface $CH
    fi
    echo
    continue

 fi


 if [ x$DRIVER = "xat76c503a" ] || [ x"`iwpriv $iface 2>/dev/null | grep set_announcedpkt`" != "x" ]
  then
     printf "$iface\t\tAtmel\t\tat76c503a"
     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
     then
          startStdIface $iface $CH
     fi
     echo
     continue

 fi


 if [ x$DRIVER = "xndiswrapper" ] || [ x"`iwpriv $iface 2>/dev/null | grep ndis_reset`" != "x" ]
 then
     printf "$iface\t\tUnknown\t\tndiswrapper"
     if [ x$2 = x$iface ]
     then
         echo " (MONITOR MODE NOT SUPPORTED)"
     fi
     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
         stopStdIface $iface
     fi
     echo
     continue
 fi


 if [ x$DRIVER != "x" ]
 then
     if [ x$CHIPSET = "x" ]
     then
         printf "$iface\t\tUNKNOWN\t\t$DRIVER"
     else
         printf "$iface\t\t$CHIPSET\t\t$DRIVER"
     fi

     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
     then
         startStdIface $iface $CH
     fi
     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
         stopStdIface $iface
     fi
     echo
     continue
 fi

printf "$iface\t\tUnknown\t\tUnknown (MONITOR MODE NOT SUPPORTED)" && echo

done

echo