; set LCID in common.str, *not* directly in common.reg
[HKEY_LOCAL_MACHINE\nls]
	"DefaultLCID" = dword:LOC_LCID

[HKEY_LOCAL_MACHINE\init]
; @CESYSGEN IF CE_MODULES_SHELL
	"Launch10"="shell.exe"
; @CESYSGEN ENDIF
; @CESYSGEN IF CE_MODULES_DEVICE
	"Launch20"="device.exe"
; @CESYSGEN ENDIF
; @CESYSGEN IF CE_MODULES_GWES
IF NOGUI !
	"Launch30"="gwes.exe"
	"Depend30"=hex:14,00
ENDIF
; @CESYSGEN ENDIF
; @CESYSGEN IF CE_MODULES_TASKMAN
	"Launch50"="taskman.exe"
	"Depend50"=hex:14,00, 1e,00
; @CESYSGEN ENDIF


; Set some HPC-compatible default system fonts
; @CESYSGEN IF CE_MODULES_GWES
[HKEY_LOCAL_MACHINE\SYSTEM\GDI\SYSFNT]
        "Nm"="Tahoma"
        "Ht"=dword:e
        "It"=dword:0
        "Wt"=dword:190
        "CS"=dword:0
[HKEY_LOCAL_MACHINE\SYSTEM\GWE\Menu\BarFnt]
        "Nm"="Tahoma"
        "Ht"=dword:e
        "It"=dword:0
        "Wt"=dword:LOC_MENUBARFONTWEIGHT
        "CS"=dword:0
[HKEY_LOCAL_MACHINE\SYSTEM\GWE\Menu\PopFnt]
        "Nm"="Tahoma"
        "Ht"=dword:e
        "It"=dword:0
        "Wt"=dword:190
        "CS"=dword:0
[HKEY_LOCAL_MACHINE\SYSTEM\GWE\OOMFnt]
        "Nm"="Tahoma"
        "Ht"=dword:e
        "It"=dword:0
        "Wt"=dword:190
        "CS"=dword:0
[HKEY_LOCAL_MACHINE\SYSTEM\GWE\Menu]
        "BarTMrg"=dword:2
; @CESYSGEN ENDIF


; @CESYSGEN IF CE_MODULES_GWES
[HKEY_LOCAL_MACHINE\SYSTEM\GWE\Button]
	"FontWeight"=dword:LOC_BUTTONFONTWEIGHT
; @CESYSGEN ENDIF


;[HKEY_LOCAL_MACHINE\system\gwe]
; Use this to center dialogs in the specified rectangle - (0,0,160,100) in this example
;	"dlgctr" = hex:00,00,00,00, 00,00,00,00, 60,01,00,00, 00,01,00,00


; @CESYSGEN IF CE_MODULES_NDIS
IF INITNOCOMM !
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\NDIS]
   "Dll"="NDIS.Dll"
   "Prefix"="NDS"
   "Index"=dword:0
   "Order"=dword:1
   "Context"=dword:4D15BA5E
ENDIF
; @CESYSGEN ENDIF

; @CESYSGEN IF CE_MODULES_AFD
IF INITNOCOMM !
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\AFD]
   "Dll"="AFD.Dll"
   "Order"=dword:2
   "Keep"=dword:1
   "Entry"="AfdInitialize"
ENDIF
; @CESYSGEN ENDIF


; @CESYSGEN IF CE_MODULES_AFD
;[HKEY_LOCAL_MACHINE\Comm\AFD]
;    "Stacks"="irdastk,tcpstk"
; @CESYSGEN ENDIF

; @CESYSGEN IF CE_MODULES_TAPI
[HKEY_LOCAL_MACHINE\ExtModems]

[HKEY_LOCAL_MACHINE\ExtModems\HayesCompat]
   "Port"="COM1:"
   "DeviceType"=dword:1
   "FriendlyName"=LOC_FRIENDLYHAYESCOMPAT

;[HKEY_LOCAL_MACHINE\ExtModems\HayesCompat\Init]

;[HKEY_LOCAL_MACHINE\ExtModems\HayesCompat\Settings]

; ---------------------------------------------------------------------------
; Default Unimodem values.  Unimodem looks here if it doesn't find an
; overriding value in the device specific registry entry.
; ---------------------------------------------------------------------------
[HKEY_LOCAL_MACHINE\Drivers\Unimodem]
   "DevConfig"=hex: 10,00, 00,00, 78,00,00,00, 10,01,00,00, 00,4B,00,00, 00,00, 08, 00, 00, 00,00,00,00

[HKEY_LOCAL_MACHINE\Drivers\Unimodem\Init]
   "1"="AT<cr>"
   "2"="ATE0V1&C1&D2<cr>"

[HKEY_LOCAL_MACHINE\Drivers\Unimodem\Settings]
   "Prefix"="AT"
   "Terminator"="<cr>"
   "DialPrefix"="D"
   "DialSuffix"=";"
   "Pulse"="P"
   "Tone"="T"
   "Blind_Off"="X4"
   "Blind_On"="X3"
   "CallSetupFailTimeout"="ATS7=<#><cr>"
   "Reset"="ATZ<cr>"

IF IMGNOPCMCIA !

; ---------------------------------------------------------------------------
; Registry values for the various PCMCIA cards that we support.  Note that
; any Unimodem settings not specified here will be searched for in the
; drivers\unimodem keys
; NOTE : Be careful about placing &F in the "3" value for Init.  This will
; wipe out the work that was done in the default "2" case.  You can use it,
; but be sure to restore whatever might be needed from step 2.  Its kludgy, but
; the default case has to work for the lowest common denominator.  We could
; move the &F into "1" or "2" if we were positive that everyone supported it.
; ---------------------------------------------------------------------------
;; Registry values for generic PCMCIA modem cards
[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Modem]
   "Tsp"="Unimodem.dll"
   "DeviceArrayIndex"=dword:1
   "Prefix"="COM"
   "Dll"="Serial.Dll"
   "DeviceType"=dword:3
   "ResetDelay"=dword:300

; ********  Registry values for the Hayes PCMCIA Card ************************
[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Hayes-OPTIMA_288_+_FAX_for_PCMCIA_with_EZ-4FA5]
   "Tsp"="Unimodem.dll"
   "DeviceArrayIndex"=dword:1
   "Prefix"="COM"
   "Dll"="Serial.dll"
   "FriendlyName"=LOC_FRIENDLYHAYESFAX
   "DeviceType"=dword:3

[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Hayes-OPTIMA_288_+_FAX_for_PCMCIA_with_EZ-4FA5\Init]
   "3"="AT&F E0 V1 &C1 &D2<cr>"
   "4"="ATW0 S95=0<cr>"

[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Hayes-OPTIMA_288_+_FAX_for_PCMCIA_with_EZ-4FA5\Settings]
   "FlowHard"="AT&K3<cr>"
   "FlowSoft"="AT&K4<cr>"
   "FlowOff"="AT&K0<cr>"

; ********  Registry values for the MEGAHERTZ 28.8 Card **********************
[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\MEGAHERTZ-XJ2288-9E81]
   "Tsp"="Unimodem.dll"
   "DeviceArrayIndex"=dword:1
   "Prefix"="COM"
   "Dll"="Serial.dll"
   "FriendlyName"=LOC_FRIENDLYMEGAHERTZ
   "DeviceType"=dword:3

[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\MEGAHERTZ-XJ2288-9E81\Init]
   "3"="ATW2B1\\V<cr>"

[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\MEGAHERTZ-XJ2288-9E81\Settings]
   "FlowHard"="AT&K3<cr>"
   "FlowSoft"="AT&K4<cr>"
   "FlowOff"="AT&K0<cr>"

; ********  Registry values for the MEGAHERTZ Cellular Card *******************
[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\MEGAHERTZ-XJ3288-26C7]
   "Tsp"="Unimodem.dll"
   "DeviceArrayIndex"=dword:1
   "Prefix"="COM"
   "Dll"="Serial.dll"
   "FriendlyName"=LOC_FRIENDLYMEGAHERTZCELL
   "DeviceType"=dword:3

[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\MEGAHERTZ-XJ3288-26C7\Init]
   "3"="ATW2B1\\V1<cr>"

[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\MEGAHERTZ-XJ3288-26C7\Settings]
   "FlowHard"="AT&K3<cr>"
   "FlowSoft"="AT&K4<cr>"
   "FlowOff"="AT&K0<cr>"

; ********  Registry values for the MEGAHERTZ  Card *******************
[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\MEGAHERTZ-Megahertz_28.8-73E3]
   "Tsp"="Unimodem.dll"
   "DeviceArrayIndex"=dword:1
   "Prefix"="COM"
   "Dll"="Serial.dll"
   "FriendlyName"=LOC_FRIENDLYMEGAHERTZCRUISE
   "DeviceType"=dword:3

[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\MEGAHERTZ-Megahertz_28.8-73E3\Init]
   "3"="ATW2B1\\V1<cr>"

[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\MEGAHERTZ-Megahertz_28.8-73E3\Settings]
   "FlowHard"="AT&K3<cr>"
   "FlowSoft"="AT&K4<cr>"
   "FlowOff"="AT&K0<cr>"

; ********  Registry values for the MEGAHERTZ 14.4 Card **********************
[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\MEGAHERTZ-XJ1144-5C3E]
   "Tsp"="Unimodem.dll"
   "DeviceArrayIndex"=dword:1
   "Prefix"="COM"
   "Dll"="Serial.Dll"
   "FriendlyName"=LOC_FRIENDLYMEGAHERTZ144
   "DeviceType"=dword:3

; ********  Registry values for the USRobotics 28.8 Sportster *****************
[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\USRobotics-PCMCIA_28800_Data/Fax-92A2]
   "Tsp"="Unimodem.dll"
   "DeviceArrayIndex"=dword:1
   "Prefix"="COM"
   "Dll"="Serial.dll"
   "FriendlyName"=LOC_FRIENDLYSPORTSTER288
   "DeviceType"=dword:3
   "ResetDelay"=dword:800

[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\USRobotics-PCMCIA_28800_Data/Fax-92A2\Init]
    "3"="AT &F1 E0 V1 &C1 &D2 &B1 &A3 S0=0<cr>"

[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\USRobotics-PCMCIA_28800_Data/Fax-92A2\Settings]
   "FlowHard"="AT&K3<cr>"
   "FlowSoft"="AT&K4<cr>"
   "FlowOff"="AT&K0<cr>"

; ********  Registry values for the Practical Peripherals ProClass 28.8 *******
[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Practical_Peripherals_Inc-PPI_PC288T2EZ_PCMCIA-F382]
   "Tsp"="Unimodem.dll"
   "DeviceArrayIndex"=dword:1
   "Prefix"="COM"
   "Dll"="Serial.dll"
   "FriendlyName"=LOC_FRIENDLYPROCLASS288
   "DeviceType"=dword:3

[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Practical_Peripherals_Inc-PPI_PC288T2EZ_PCMCIA-F382\Init]

[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Practical_Peripherals_Inc-PPI_PC288T2EZ_PCMCIA-F382\Settings]

; ********  Registry values for the Practical Peripherals ProClass 28.8 *******
; (the newer revision gives a different Pnp ID)
[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Practical_Peripherals_Inc-PPI_PC288T2EZ_PCMCIA-DAE6]
   "Tsp"="Unimodem.dll"
   "DeviceArrayIndex"=dword:1
   "Prefix"="COM"
   "Dll"="Serial.dll"
   "FriendlyName"=LOC_FRIENDLYPROCLASS288
   "DeviceType"=dword:3

[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Practical_Peripherals_Inc-PPI_PC288T2EZ_PCMCIA-DAE6\Init]

[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Practical_Peripherals_Inc-PPI_PC288T2EZ_PCMCIA-DAE6\Settings]

; ********  Registry values for the Xircom 33.6 Credit Card Modem  *******
[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Xircom-CreditCard_Modem_33.6-5347]
   "Tsp"="Unimodem.dll"
   "DeviceArrayIndex"=dword:1
   "Prefix"="COM"
   "Dll"="Serial.dll"
   "FriendlyName"=LOC_FRIENDLYXIRCOM336
   "DeviceType"=dword:3

[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Xircom-CreditCard_Modem_33.6-5347\Init]

[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Xircom-CreditCard_Modem_33.6-5347\Settings]



; ********  Registry values for the Socket Communications 16550 UART Card *****
[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Socket_Communications_Inc-Serial_Port_Adapter_Revision_B-5E3E]
   "Tsp"="Unimodem.dll"
   "DeviceArrayIndex"=dword:1
   "Prefix"="COM"
   "Dll"="Serial.dll"
   "FriendlyName"="Socket I/O Serial"
   "DeviceType"=dword:0

; ********  Registry values for the Xircom 33.6 Credit Card Modem + Ether *******
[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Xircom-CreditCard_Ethernet+Modem_33.6-05DD\MULTI\1]
   "Tsp"="Unimodem.dll"
   "DeviceArrayIndex"=dword:1
   "Prefix"="COM"
   "Dll"="Serial.dll"
   "FriendlyName"=LOC_FRIENDLYXIRCOMETHER336
   "DeviceType"=dword:3

[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Xircom-CreditCard_Ethernet+Modem_33.6-05DD\MULTI\1\Init]

[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Xircom-CreditCard_Ethernet+Modem_33.6-05DD\MULTI\1\Settings]


; ********  Registry values for the Motorola Montana *********************
[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Motorola-MONTANA_V.34_FAX/MODEM-9E9C]
   "Tsp"="Unimodem.dll"
   "DeviceArrayIndex"=dword:1
   "Prefix"="COM"
   "Dll"="Serial.dll"
   "FriendlyName"=LOC_FRIENDLYMOTOMONTANA288
   "DeviceType"=dword:3

[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Motorola-MONTANA_V.34_FAX/MODEM-9E9C\Init]
   "3"="ATS7=60M1<cr>"

[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Motorola-MONTANA_V.34_FAX/MODEM-9E9C\Settings]
   "FlowHard"="AT\\Q3<cr>"
   "FlowSoft"="AT\\Q1<cr>"
   "FlowOff"="AT\\Q<cr>"

; ********  Registry values for the Motorola Power 14.4 *********************
[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\MOTOROLA-POWER_14.4-8980]
   "Tsp"="Unimodem.dll"
   "DeviceArrayIndex"=dword:1
   "Prefix"="COM"
   "Dll"="Serial.dll"
   "FriendlyName"=LOC_FRIENDLYMOTOPOWER144
   "DeviceType"=dword:3

[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\MOTOROLA-POWER_14.4-8980\Init]
   "3"="ATS7=60S19=0M1<cr>"

[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\MOTOROLA-POWER_14.4-8980\Settings]
   "FlowHard"="AT\\Q3<cr>"
   "FlowSoft"="AT\\Q1<cr>"
   "FlowOff"="AT\\Q<cr>"

IF NEWSCARD
[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Motorola,_Inc.-NewsCard_Data_Receiver-E6DD]
    "Dll"="NEWSCARD.DLL"
    "Prefix"="PGR"
    "Index"=dword:1
ENDIF NEWSCARD

ENDIF IMGNOPCMCIA!
; @CESYSGEN ENDIF CE_MODULES_TAPI

IF IMGNOPCMCIA !
; @CESYSGEN IF CE_MODULES_DUALIO
; ********  Registry values for the Socket Communications DualIO Card *****
[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Socket_Communications_Inc-Dual_Serial_Port_Adapter_Revision_E-E98E\MULTI\1]
   "Tsp"="Unimodem.dll"
   "DeviceArrayIndex"=dword:0
   "Prefix"="COM"
   "Dll"="DualIO.dll"
   "FriendlyName"=LOC_FRIENDLYSOCKETDUALA
   "DeviceType"=dword:0
[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Socket_Communications_Inc-Dual_Serial_Port_Adapter_Revision_E-E98E\MULTI\2]
   "Tsp"="Unimodem.dll"
   "DeviceArrayIndex"=dword:1
   "Prefix"="COM"
   "Dll"="DualIO.dll"
   "FriendlyName"=LOC_FRIENDLYSOCKETDUALB
   "DeviceType"=dword:0
; @CESYSGEN ENDIF CE_MODULES_DUALIO

; @CESYSGEN IF CE_MODULES_ATADISK
[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\ATADisk]
    "Dll"="ATADISK.DLL"
    "Prefix"="DSK"
    "Ioctl"=dword:4
    "FSD"="FATFS.DLL"
; @CESYSGEN ENDIF

; @CESYSGEN IF CE_MODULES_SRAMDISK
[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\SRAMDisk]
    "Dll"="SRAMDISK.DLL"
    "Prefix"="DSK"
    "Ioctl"=dword:4
    "FSD"="FATFS.DLL"
; @CESYSGEN ENDIF

; @CESYSGEN IF CE_MODULES_TRUEFFS
[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\TrueFFS]
   "Dll"="TrueFFS.dll"
   "Prefix"="DSK"
   "Ioctl"=dword:4
   "FSD"="FATFS.DLL"
; @CESYSGEN ENDIF

[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Detect\10]
   "Dll"="SERIAL.DLL"
   "Entry"="DetectModem"

; @CESYSGEN IF CE_MODULES_TRUEFFS
[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Detect\90]
   "Dll"="TrueFFS.dll"
   "Entry"="DetectTFFSdisk"
; @CESYSGEN ENDIF CE_MODULES_TRUEFFS

; @CESYSGEN IF CE_MODULES_ATADISK
[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Detect\50]
   "Dll"="ATADISK.DLL"
   "Entry"="DetectATADisk"
; @CESYSGEN ENDIF CE_MODULES_ATADISK

; @CESYSGEN IF CE_MODULES_NE2000
[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Detect\60]
   "Dll"="NE2000.DLL"
   "Entry"="DetectNE2000"
[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\NE2000]
   "Dll"="ndis.dll"
   "Prefix"="NDS"
   "Miniport"="NE2000"
; @CESYSGEN ENDIF CE_MODULES_NE2000

; @CESYSGEN IF CE_MODULES_PROXIM
[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\PROXIM-LAN_PC_CARD-E8F2]
   "Dll"="ndis.dll"
   "Prefix"="NDS"
   "Miniport"="PROXIM"
   "Index"=dword:1
; @CESYSGEN ENDIF CE_MODULES_PROXIM
ENDIF IMGNOPCMCIA!


[HKEY_LOCAL_MACHINE\Comm\RTL8139]
   "DisplayName"="Realtek RTL8139 based Fast Ethernet Driver"
   "Group"="NDIS"
   "ImagePath"="rtl8139.dll"

[HKEY_LOCAL_MACHINE\Comm\RTL8139\Linkage]
   "Route"=multi_sz:"RTL81391"
;   , "RTL81392"

[HKEY_LOCAL_MACHINE\Comm\RTL81391]
   "DisplayName"="Realtek RTL8139 based Fast Ethernet Driver"
   "Group"="NDIS"
   "ImagePath"="rtl8139.dll"

[HKEY_LOCAL_MACHINE\Comm\RTL81391\Parms]
   "BusNumber"=dword:0
   "BusType"=dword:5
   "CardType"=dword:2
;   "DuplexMode"=dword:1
;   "SlotNumber"=dword:0b
   "PhysicalAddressBase"=dword:001A0000

; Registry values for the PPP driver
[HKEY_LOCAL_MACHINE\Comm\RTL81391\Parms\TcpIp]
   "EnableDHCP"=dword:1
   ; This should be MULTI_SZ
   "DefaultGateway"=""
   ; Use zero for broadcast address? (or 255.255.255.255)
   "UseZeroBroadcast"=dword:0
   ; Thus should be MULTI_SZ, the IP address list
   "IpAddress"="0.0.0.0"
   ; This should be MULTI_SZ, the subnet masks for the above IP addresses
   "Subnetmask"="0.0.0.0"

   ; This should be MULTI_SZ
;   "DefaultGateway"="172.20.1.254"
   ; This should be SZ... If null it means use LAN, else WAN and Interface.
;   "LLInterface"=""
   ; Use zero for broadcast address? (or 255.255.255.255)
;   "UseZeroBroadcast"=dword:0
   ; Thus should be MULTI_SZ, the IP address list
;   "IpAddress"="172.20.30.161"
   ; This should be MULTI_SZ, the subnet masks for the above IP addresses
;   "Subnetmask"="255.255.0.0"
; @CESYSGEN ENDIF

;second rtl8139 device
;[HKEY_LOCAL_MACHINE\Comm\RTL81392]
;   "DisplayName"="Realtek RTL8139 based Fast Ethernet Driver"
;   "Group"="NDIS"
;   "ImagePath"="rtl8139.dll"

;[HKEY_LOCAL_MACHINE\Comm\RTL81392\Parms]
;   "BusNumber"=dword:0
;   "BusType"=dword:5
;   "CardType"=dword:2
;   "DuplexMode"=dword:1
;   "SlotNumber"=dword:09
;   "PhysicalAddressBase"=dword:00190000
;;

; @CESYSGEN IF CE_MODULES_NE2000
;[HKEY_LOCAL_MACHINE\Comm\NE2000]
;   "DisplayName"=LOC_FRIENDLYNE2000COMPAT
;   "Group"="NDIS"
;   "ImagePath"="ne2000.dll"

;[HKEY_LOCAL_MACHINE\Comm\NE2000\Linkage]
;   "Route"=multi_sz:"NE20001"

;[HKEY_LOCAL_MACHINE\Comm\NE20001]
;   "DisplayName"=LOC_FRIENDLYNE2000COMPAT
;   "Group"="NDIS"
;   "ImagePath"="ne2000.dll"

;[HKEY_LOCAL_MACHINE\Comm\NE20001\Parms]
;   "BusNumber"=dword:0
;   "BusType"=dword:8
;   "InterruptNumber"=dword:03
;   "IoBaseAddress"=dword:0300
;   "Transceiver"=dword:3
;   "CardType"=dword:1
; @CESYSGEN ENDIF CE_MODULES_NE2000

; @CESYSGEN IF CE_MODULES_PROXIM
;[HKEY_LOCAL_MACHINE\Comm\PROXIM]
;   "DisplayName"=LOC_FRIENDLYPROXIM
;   "Group"="NDIS"
;   "ImagePath"="proxim.dll"

;[HKEY_LOCAL_MACHINE\Comm\PROXIM\Linkage]
;   "Route"=multi_sz:"PROXIM1"

;[HKEY_LOCAL_MACHINE\Comm\PROXIM1]
;   "DisplayName"=LOC_FRIENDLYPROXIM
 ;  "Group"="NDIS"
;   "ImagePath"="proxim.dll"

;[HKEY_LOCAL_MACHINE\Comm\PROXIM1\Parms]
;   "BusNumber"=dword:0
;   "BusType"=dword:8
;   "CardType"=dword:2
;   "Domain"=dword:0
;   "Inactivity_Sec"=dword:1
;   "Inactivity_Min"=dword:0
;   "Roam_Config"=dword:1
; @CESYSGEN ENDIF CE_MODULES_PROXIM

; @CESYSGEN IF CE_MODULES_IRCOMM
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\IrCOMM]
   "Tsp"="Unimodem.dll"
   "Dll"="IRCOMM.DLL"
   "Prefix"="COM"
   "Order"=dword:3
   "Index"=dword:3
   "DeviceType"=dword:6
   "FriendlyName"=LOC_FRIENDLYINFRARED
   "DevConfig"=hex: 10,00, 00,00, 02,00,00,00, 10,01,00,00, 00,4B,00,00, 00,00, 08, 00, 00, 00,00,00,00
; @CESYSGEN ENDIF


; @CESYSGEN IF CE_MODULES_SRAMDISK
[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Detect\99]
   "Dll"="SRAMDISK.DLL"
   "Entry"="DetectSRAMDisk"
; @CESYSGEN ENDIF

; @CESYSGEN IF CE_MODULES_TCPSTK
; Registry values for the TCP/IP stack
[HKEY_LOCAL_MACHINE\Comm\Tcpip\Parms]
   "IpEnableRouter"=dword:0
; @CESYSGEN ENDIF

[HKEY_LOCAL_MACHINE\Comm\Tcpip\Linkage]
   ; This should be MULTI_SZ
   ; This is the list of llip drivers to load
   "Bind"="RTL81391"
   ;"Bind"=""


; @CESYSGEN IF CE_MODULES_PPP
;[HKEY_LOCAL_MACHINE\Comm\Tcpip\Linkage]
;   ; This should be MULTI_SZ
;   ; This is the list of llip drivers to load
;    "Bind"="ppp"

; Registry values for the PPP driver
[HKEY_LOCAL_MACHINE\Comm\ppp\Parms\TcpIp]
   ; This should be MULTI_SZ
   "DefaultGateway"=""
   ; This should be SZ... If null it means use LAN, else WAN and Interface.
   "LLInterface"="ppp.dll"
   ; Use zero for broadcast address? (or 255.255.255.255)
   "UseZeroBroadcast"=dword:0
   ; Thus should be MULTI_SZ, the IP address list
   "IpAddress"="0.0.0.0"
   ; This should be MULTI_SZ, the subnet masks for the above IP addresses
   "Subnetmask"="0.0.0.0"
; @CESYSGEN ENDIF

; @CESYSGEN IF CE_MODULES_WAVEAPI
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WAPIMAN]
   "Prefix"="WAM"
   "Dll"="waveapi.dll"
   "Index"=dword:1
   "Order"=dword:1
; @CESYSGEN ENDIF

; @CESYSGEN IF CE_MODULES_PRNPORT
; Printer Port settings
[HKEY_LOCAL_MACHINE\Printers\Ports]
    "Port1"="COM1: 9600"
    "Port2"="COM1: 57600"
    "Port3"="IRDA"
    "Port4"="LPT1:"
    "Port5"="NET0:"
; @CESYSGEN ENDIF

; @CESYSGEN IF CE_MODULES_PCL
[HKEY_LOCAL_MACHINE\Printers]
	"DefaultPrinter"="PCL Laser"

[HKEY_LOCAL_MACHINE\Printers\PCL Laser]
    "Driver"="pcl.dll"
    "High Quality"="300"
    "Draft Quality"="150"
    "Color"="Monochrome"
    "Version"=dword:0200

[HKEY_LOCAL_MACHINE\Printers\PCL Inkjet]
    "Driver"="pcl.dll"
    "High Quality"="300"
    "Draft Quality"="150"
    "Color"="Monochrome"
    "Version"=dword:0100
; @CESYSGEN ENDIF



; The registry will take the last entry.
; @CESYSGEN IF CE_MODULES_SECUR32 && CE_MODULES_SCHANNEL
[HKEY_LOCAL_MACHINE\Comm\SecurityProviders]
    "Providers"="schannel.dll"
; @CESYSGEN ENDIF
; @CESYSGEN IF CE_MODULES_SECUR32 && CE_MODULES_NTLMSSP
[HKEY_LOCAL_MACHINE\Comm\SecurityProviders]
    "Providers"="ntlmssp.dll"
; @CESYSGEN ENDIF
; @CESYSGEN IF CE_MODULES_SECUR32 && CE_MODULES_SCHANNEL && CE_MODULES_NTLMSSP
[HKEY_LOCAL_MACHINE\Comm\SecurityProviders]
    "Providers"="schannel.dll, ntlmssp.dll"
; @CESYSGEN ENDIF

; @CESYSGEN IF CE_MODULES_SCHANNEL
[HKEY_LOCAL_MACHINE\Comm\SecurityProviders\SCHANNEL\Protocols]
    "Enabled"=dword:1
[HKEY_LOCAL_MACHINE\Comm\SecurityProviders\SCHANNEL\Protocols\Multi-Protocol Unified Hello]
    "Enabled"=dword:1
[HKEY_LOCAL_MACHINE\Comm\SecurityProviders\SCHANNEL\Protocols\Multi-Protocol Unified Hello\Client]
    "Enabled"=dword:1
[HKEY_LOCAL_MACHINE\Comm\SecurityProviders\SCHANNEL\Protocols\Multi-Protocol Unified Hello\Server]
    "Enabled"=dword:0
[HKEY_LOCAL_MACHINE\Comm\SecurityProviders\SCHANNEL\Protocols\PCT 1.0]
    "Enabled"=dword:1
[HKEY_LOCAL_MACHINE\Comm\SecurityProviders\SCHANNEL\Protocols\PCT 1.0\Client]
    "Enabled"=dword:1
[HKEY_LOCAL_MACHINE\Comm\SecurityProviders\SCHANNEL\Protocols\PCT 1.0\Server]
    "Enabled"=dword:0
[HKEY_LOCAL_MACHINE\Comm\SecurityProviders\SCHANNEL\Protocols\SSL 2.0]
    "Enabled"=dword:1
[HKEY_LOCAL_MACHINE\Comm\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Client]
    "Enabled"=dword:1
[HKEY_LOCAL_MACHINE\Comm\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Server]
    "Enabled"=dword:0
[HKEY_LOCAL_MACHINE\Comm\SecurityProviders\SCHANNEL\Protocols\SSL 3.0]
    "Enabled"=dword:1
[HKEY_LOCAL_MACHINE\Comm\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Client]
    "Enabled"=dword:1
[HKEY_LOCAL_MACHINE\Comm\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Server]
    "Enabled"=dword:0
; @CESYSGEN ENDIF

; @CESYSGEN IF CE_MODULES_RSABASE
[HKEY_LOCAL_MACHINE\Comm\Security\Crypto\Defaults]

[HKEY_LOCAL_MACHINE\Comm\Security\Crypto\Defaults\Provider]

[HKEY_LOCAL_MACHINE\Comm\Security\Crypto\Defaults\Provider\Microsoft Base Cryptographic Provider v1.0]
    "Image Path"="\\Windows\\rsabase.dll"
    "Type"=dword:00000001

; ******** Different signature for each processor *******************
IF _TGTCPU=R3000
"Signature"=hex:17,5e,5c,b3,dd,70,11,21,c7,23,9a,77,48,c0,2b,2f,\
                23,d3,40,c4,60,0c,15,87,e9,0b,a2,0b,b8,78,29,25,\
                09,92,3a,97,65,29,af,4e,3f,97,c8,57,e0,a3,c7,aa,\
                ce,ac,41,33,d2,2e,08,12,4a,4e,01,9a,1d,57,da,13,\
                e2,02,53,85,57,cb,56,d9,82,57,f1,df,b3,5b,65,19,\
                4b,4c,37,75,04,40,d1,0a,25,3f,67,b1,ea,b2,20,1c,\
                52,63,3c,f7,99,85,60,26,85,1b,e0,e9,49,66,01,3c,\
                ac,ad,2c,a3,6f,66,10,f1,9b,bb,8a,4c,24,e7,68,85,\
                00,00,00,00,00,00,00,00
ENDIF
IF _TGTCPU=R4100
"Signature"=hex:d9,59,bf,9b,55,b6,96,d8,a4,7f,f3,4c,cb,c4,e8,2e,\
                5a,c2,ad,1b,9b,8c,51,90,a9,c6,ba,04,ce,eb,3e,ff,\
                7e,08,92,b1,3b,65,27,f4,09,04,b1,b4,91,4d,15,38,\
                32,5f,ca,50,1b,c1,ba,50,c3,84,d7,9e,41,25,f1,3e,\
                a6,9b,a6,10,1a,2a,5e,82,19,09,c5,2e,9a,8c,77,e2,\
                4e,0b,a5,11,70,d4,0a,27,b7,b6,0a,f4,dd,fa,8d,96,\
                46,69,49,8f,25,74,05,f4,c6,42,ab,34,ce,16,56,0a,\
                6d,58,d3,7e,78,9b,a6,92,7f,c5,e7,13,29,c4,34,4d,\
                00,00,00,00,00,00,00,00
ENDIF
IF _TGTCPU=R4111
"Signature"=hex:d9,59,bf,9b,55,b6,96,d8,a4,7f,f3,4c,cb,c4,e8,2e,\
                5a,c2,ad,1b,9b,8c,51,90,a9,c6,ba,04,ce,eb,3e,ff,\
                7e,08,92,b1,3b,65,27,f4,09,04,b1,b4,91,4d,15,38,\
                32,5f,ca,50,1b,c1,ba,50,c3,84,d7,9e,41,25,f1,3e,\
                a6,9b,a6,10,1a,2a,5e,82,19,09,c5,2e,9a,8c,77,e2,\
                4e,0b,a5,11,70,d4,0a,27,b7,b6,0a,f4,dd,fa,8d,96,\
                46,69,49,8f,25,74,05,f4,c6,42,ab,34,ce,16,56,0a,\
                6d,58,d3,7e,78,9b,a6,92,7f,c5,e7,13,29,c4,34,4d,\
                00,00,00,00,00,00,00,00
ENDIF
IF _TGTCPU=R4300
"Signature"=hex:70,00,f9,57,4c,87,21,a9,52,f4,1f,0c,17,82,54,b9,\
                d1,ed,56,82,5c,7b,eb,15,77,ad,f1,5c,fd,12,48,31,\
                cd,7d,de,36,19,20,68,85,89,4a,e4,04,1a,96,7b,13,\
                d2,dd,a1,0d,47,ea,b0,83,25,b0,84,00,27,be,60,80,\
                8a,b5,2b,5d,2c,c7,e2,cf,50,9c,75,6a,74,7d,51,3e,\
                6e,18,4f,3c,9d,f3,2a,00,2a,aa,3c,2b,65,eb,55,3e,\
                79,c3,64,96,88,b8,50,38,11,e8,96,1a,c8,7a,96,99,\
                c9,5c,6a,2c,f4,66,d9,81,f6,62,da,54,26,84,bd,72,\
                00,00,00,00,00,00,00,00
ENDIF
IF _TGTCPU=PPC821
"Signature"=hex:70,54,47,74,93,32,c8,2b,f9,59,dc,eb,97,d1,af,73,\
                a4,bc,a4,b6,4c,b2,96,58,8f,d0,ed,20,39,16,87,aa,\
                96,b2,4b,46,9b,02,51,e3,8f,81,75,da,a6,d4,fe,d6,\
                04,60,d1,c3,62,35,40,77,e5,71,9b,7b,6b,ce,98,64,\
                bc,e1,fd,3a,43,66,09,77,9a,1c,5d,34,3c,64,2f,f3,\
                8b,d5,17,b8,fd,71,5b,c3,8f,88,f3,a0,92,e2,02,80,\
                fb,46,b7,43,69,85,dd,b0,4d,79,b1,ad,5c,9e,7b,81,\
                8f,12,55,dd,44,04,ce,86,c6,f4,9a,7b,9e,f1,73,77,\
                00,00,00,00,00,00,00,00
ENDIF
IF _TGTCPU=PPC403
"Signature"=hex:70,3d,3e,84,f6,bb,84,22,de,29,e4,30,d3,1c,4a,65,\
                9a,a4,5d,18,56,5b,5a,d1,ba,57,fe,d1,99,82,71,a7,\
                14,c6,f5,a0,bb,b5,6a,44,54,de,b4,93,6e,68,86,43,\
                75,fa,71,93,9f,4c,eb,a2,6d,f2,e5,3b,b3,21,e9,fd,\
                f6,e3,7e,e6,3f,c3,f3,72,3a,ba,c6,77,1a,f4,c1,de,\
                d4,12,ad,ff,a8,a2,9c,10,e5,c3,be,86,c8,15,96,9b,\
                06,a6,ea,80,fa,c8,d6,72,fd,c9,79,a2,a6,04,12,95,\
                9c,b9,12,e7,20,03,aa,0f,05,00,ed,b2,49,58,cf,26,\
                00,00,00,00,00,00,00,00
ENDIF
IF _TGTCPU=SH3
"Signature"=hex:e1,ce,d1,0d,08,fa,42,15,40,1c,9f,7a,b1,b4,21,6f,\
                07,a3,fa,43,68,23,80,81,e4,10,86,95,94,d6,71,c8,\
                e4,a5,e6,b6,cb,e0,2d,f7,00,26,11,28,b9,c3,f8,78,\
                e4,5e,02,1c,7b,45,61,2f,c5,95,18,c0,dc,ed,5a,c1,\
                c1,35,5b,c7,77,2e,ca,f8,16,81,0c,ee,81,2d,b8,06,\
                7a,0e,db,27,f7,d9,d5,ce,34,e4,3b,fc,c6,16,27,9f,\
                4e,7f,79,93,e7,e9,c4,13,39,ea,de,67,fb,56,0e,9d,\
                73,80,76,7e,24,93,33,73,9f,97,d5,75,ff,4d,a7,83,\
                00,00,00,00,00,00,00,00
ENDIF
IF _TGTCPU=SH4
"Signature"=hex:73,51,48,34,39,4c,b2,d9,73,4a,e8,59,01,2f,b9,3f,\
                48,37,dc,bb,54,6f,f4,51,a0,9e,7c,7a,cb,85,22,ec,\
                52,9a,f2,27,5d,a1,dc,6c,1a,5e,24,10,9d,1f,4f,ab,\
                51,3d,3b,9a,bc,1b,23,ef,3a,03,c9,52,c9,a4,d7,14,\
                05,00,9e,29,47,63,08,37,8a,c0,12,3d,f3,83,90,f3,\
                9c,9c,b2,3f,43,29,b5,34,41,b9,5d,88,a1,9a,e9,94,\
                77,49,1c,2c,6f,05,11,11,4c,b0,50,00,8d,7c,0c,9f,\
                f4,46,89,ed,4f,66,e3,29,49,0d,26,6f,e0,d0,74,1e,\
                00,00,00,00,00,00,00,00
ENDIF
IF _TGTCPU=i486
"Signature"=hex:30,66,f2,a9,02,4e,b6,b7,c5,bb,b8,4b,b3,a1,c4,86,\
                34,ad,e3,2e,81,f4,0c,0a,91,b4,03,de,62,31,33,1c,\
                9e,74,ab,c4,07,21,26,1f,38,4b,dd,c6,51,e7,59,1e,\
                7a,93,cd,b4,1f,48,c8,18,d2,c4,ee,82,db,52,a1,f3,\
                03,7c,6f,39,8f,0e,12,96,c8,04,e5,02,bd,f9,7f,27,\
                0a,b4,fd,bc,ad,60,4c,25,8e,22,ca,14,a4,14,9e,a7,\
                8c,cc,3a,55,86,51,4b,73,fa,89,e9,bc,b8,10,cc,dd,\
                98,f6,b7,2a,44,39,05,7b,93,3c,88,82,7c,5c,e3,a6,\
                00,00,00,00,00,00,00,00
ENDIF
IF _TGTCPU=SA1100
"Signature"=hex:ab,f6,b7,11,86,15,ed,e0,08,8c,06,ab,bd,e2,36,59,\
                0a,ff,73,61,33,3e,50,82,0e,20,27,c5,86,5f,ea,9d,\
                4a,61,6f,81,ca,1b,ea,d4,37,cd,b9,f9,f8,58,ed,c0,\
                bc,73,67,e4,4f,33,6c,d7,32,0e,4c,c9,08,17,03,d8,\
                79,5c,3c,2e,16,90,34,80,08,c7,df,40,b7,16,c3,f6,\
                27,2d,62,e0,84,b2,a0,b0,e4,dc,de,df,93,5e,6f,a6,\
                ec,c4,14,36,72,e6,d3,13,37,49,77,90,0f,eb,12,1e,\
                c3,d3,e0,c0,31,3f,45,07,84,c3,f3,3e,6e,c6,56,41,\
                00,00,00,00,00,00,00,00
ENDIF
IF _TGTCPU=ARM720
"Signature"=hex:86,a0,2a,2f,8a,01,00,7b,e9,02,cb,ea,8f,d2,59,c8,\
                85,cc,ef,03,2a,ae,15,38,4c,b7,21,ec,36,dc,c8,f9,\
                0c,03,57,17,ed,27,54,e4,5c,34,35,71,fe,3c,2b,76,\
                83,22,3f,97,94,94,40,93,a5,c1,8b,4f,86,e1,60,0d,\
                bb,64,2a,d6,34,00,10,66,79,28,64,3f,0f,bf,1c,a5,\
                ee,17,33,b9,77,6a,46,31,e3,69,f3,bb,b8,75,d5,a6,\
                9f,17,77,33,5c,e5,60,c0,56,6f,f7,0e,78,09,e4,45,\
                5b,ea,5a,d1,9f,1a,a0,6e,b5,6c,c6,b3,45,af,30,5a,\
                00,00,00,00,00,00,00,00
ENDIF

[HKEY_LOCAL_MACHINE\Comm\Security\Crypto\Defaults\Provider Types]

[HKEY_LOCAL_MACHINE\Comm\Security\Crypto\Defaults\Provider Types\Type 001]
"Name"="Microsoft Base Cryptographic Provider v1.0"
; @CESYSGEN ENDIF

; @CESYSGEN IF CE_MODULES_OLEAUT32
; STDOLE2.TLB
[HKEY_CLASSES_ROOT\TypeLib\{00020430-0000-0000-C000-000000000046}\2.0\0]
    @="oleaut32.dll"
; @CESYSGEN ENDIF

; @CESYSGEN IF CE_MODULES_MIDIAPI
; @CESYSGEN ENDIF


; @CESYSGEN IF CE_MODULES_SOUNDS || CE_MODULES_SOUNDSG
; Sound CPL registry values
[HKEY_CURRENT_USER\ControlPanel\Volume]
; 1- soft, 0x10002=loud
"Key"=dword:10002
"Screen"=dword:10002
;7=Enable all sounds (1=Notifications, 2=Apps, 4=Events.)
"Mute"=dword:7
"Volume"=dword:99999999

[HKEY_LOCAL_MACHINE\Snd\Scheme]
;Localize scheme name
	"All Sou0"=LOC_ALLSOUNDS

; These are filenames--not localizable
[HKEY_LOCAL_MACHINE\Snd\Event]
	".Scheme"=".Default"
	"All Sou0"=multi_sz:"Asterisk",
			"Close",
			"critical",
			"default",
			"Empty",
			"exclam",
			"infbeg",
			"infend",
			"infintr",
			"MenuPop",
			"MenuSel",
			"OpenProg",
			"question",
			"Infbeg",
			"Infend",
			"Infintr",
			"startup",
			"WindMax",
			"WindMin"
; end Sound CPL registry values
; @CESYSGEN ENDIF

; @CESYSGEN IF CE_MODULES_POWER || CE_MODULES_POWERG
; Power control panel settings
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power]
"BattPowerOff"=dword:b4
"ExtPowerOff"=dword:0
; @CESYSGEN ENDIF

; @CESYSGEN IF CE_MODULES_COMM || CE_MODULES_COMMG || CE_MODULES_TAPI || CE_MODULES_NETUI
; Communications dialing default locations
[HKEY_CURRENT_USER\ControlPanel\Dial]
; What is Location ID (value name) for the current location
"CurrentLoc"=dword:0
; What is the next permanent location ID to be used when creating a new entry
"HighLocID"=dword:2

;Default Location settings -- need to be localized
[HKEY_CURRENT_USER\ControlPanel\Dial\Locations]
; Each MultiSz location (value name = PermLocationID" has :
;   LocationName, LocalFmt, LdFmt, IntntlFmt, AreaCode, CwCode, CountryCode, & Options
"0"=multi_sz: LOC_WORKLOCATIONNAME,
              LOC_WORKLOCALFMT, 
              LOC_WORKLDFMT, 
              LOC_WORKINTNTLFMT,
              LOC_WORKAREACODE,
              LOC_WORKCWCODE,
              LOC_WORKCOUNTRYCODE,
              LOC_WORKOPTIONS
"1"=multi_sz: LOC_HOMELOCATIONNAME,
              LOC_HOMELOCALFMT, 
              LOC_HOMELDFMT, 
              LOC_HOMEINTNTLFMT,
              LOC_HOMEAREACODE,
              LOC_HOMECWCODE,
              LOC_HOMECOUNTRYCODE,
              LOC_HOMEOPTIONS 
; end TAPI/comm CPL location settings
; @CESYSGEN ENDIF

; @CESYSGEN IF CE_MODULES_COMM || CE_MODULES_COMMG
[HKEY_CURRENT_USER\ControlPanel\Comm]
"AutoCnct"=dword:1
"Cnct"=LOC_DESKTOPCONNECT
; @CESYSGEN ENDIF

; @CESYSGEN IF CE_MODULES_SCREEN || CE_MODULES_SCREENG || CE_MODULES_TASKMAN
; initial value for background bitmap, if any
[HKEY_CURRENT_USER\ControlPanel\Desktop]
"wallpaper"="\\Windows\\WinCE.bmp"
; @CESYSGEN ENDIF

; @CESYSGEN IF CE_MODULES_SCREENG
; This key must be present (but it can be empty) for the portrait-form-factor Display CPL to work.
[HKEY_LOCAL_MACHINE\Software\Microsoft\Active Desktop]
; @CESYSGEN ENDIF

; @CESYSGEN IF CE_MODULES_PASSWRD || CE_MODULES_PASSWRDG
; power up flag for Owner applet to save Area code
[HKEY_CURRENT_USER\Start]
"dummy"=dword:1
; @CESYSGEN ENDIF

; @CESYSGEN IF CE_MODULES_CONSOLE
; Set Default Font Name/Size for Console
[HKEY_LOCAL_MACHINE\Drivers\Console]
   "Font"=LOC_CONSOLEFONTNAME
   "Size"=dword:LOC_CONSOLEFONTSIZE
   "PaintRow"=dword:LOC_CONSOLEPAINTFIX
; @CESYSGEN ENDIF

; @CESYSGEN IF CE_MODULES_INTL || CE_MODULES_INTLG
; Add an extra locale-specfic currency symbol (e.g. Euro)
[HKEY_LOCAL_MACHINE\nls]
   "ExtraCurrency"=dword:LOC_EXTRACURRENCY
; @CESYSGEN ENDIF